The USB-Link™ 2, the next generation vehicle interface from NEXIQ Technologies, has arrived. Dependable and rugged, the new USB-Link™ 2 is five times faster than its predecessor. It has sixteen times more random access memory than the old USB-Link, and it supports heavier bus loads on simultaneous channels.

If you cannot find any software on our website for your product, it may be because the software of your product cannot be updated via USB. Please use the method that is applicable for your device: Connected devices (TV, Home Cinema, Blu-ray player etc): Update can be performed via USB, as well as carried out using an active network connection. Q3X is the ideal solution for those customers searching for the latest performance levels in a modern design product. The thermal head provides excellent graphic printing quality and lower consumption.

Application note - Character Conversion

Character to Card Data to ASCII character conversion for tracks 1,2, and 3

MAGTEK DEVICE DRIVERS FOR WINDOWS Programming Reference Manual

Overview, commands, and properties for The MagTek Device (MTD) Drivers for Windows. It is a collection of individual drivers that support a number of MagTek products.

MagTek JavaPOS FOR MSR DEVICES Programming Reference Manual

Installation, utility and sample. The MagTek UPOS 1.13 JavaPOS MSR is installed via an InstallShield application.

MagTek OPOS FOR MSR DEVICES Programming Reference Manual

Overview and instruction. The MagTek UPOS 1.13 OPOS MSR is installed via an InstallShield application.

OMTD OPOS - Programming Manual - ActiveX - PN D99875144

FOR MAGTEK DEVICES Programming Reference Manual - Features and requirements, installation for OMTD program. It is an extension of the MagTek Device Driver Program (MTD). The OMTD Program provides an OPOS-compliant application interface to MagTek products and works on Windows 95, 98, ME, NT, 2000, and XP. OMTD is in the form of a set of ActiveX controls (COs).

Demo Application Note RS232 & USB Demo

This comprehensive demo supports a number of MagTek RS-232 and USB products. - PN D99875136

MagTek Devices Safety and Maintenance, Cleaning Devices - PN D998200389

As part of the preventative actions for the Corona virus, it is important to clean equipment and surfaces. The Center for Disease Control (CDC) recommends cleaning and disinfecting high-touch surfaces and objects at least once daily. It is important to properly clean and disinfect your MagTek device.

100 Millimeter Compatible Swipe Reader

100 Millimeter Compatible Swipe Reader - PN D99831012

101 Millimeter Compatible Swipe Reader

101 Millimeter Compatible Swipe Reader Technical Reference Guide

90 Millimeter Compatible Swipe Reader

90 Millimeter Compatible Swipe Reader

Iveco Spa Usb Devices Driver Download Windows 10

Mini Wedge Swipe Reader

The MiniWedge Swipe Reader connects between a PC and its keyboard. The Reader looks transparent to both the keyboard and the PC until a card is read.

Sure Swipe USB KB Technical Reference Manual

The USB (Universal Serial Bus) Keyboard Emulation Swipe Reader is a compact magnetic stripe card reader with a single read head that conforms to ISO standards.

SureSwipe USB HID Technical Reference Manual

The USB (Universal Serial Bus) HID (Human Interface Device) Swipe Reader is a compact magnetic stripe card reader with a single read head that conforms to ISO standards.

MagTek Response to NIST SP 800-131A re: Two-Key TDEA Encryption - PN D998200305

A response to a publication in March 2019, by NIST (National Institute of Standards and Technology) entitled: “NIST Special Publication 800-131A Revision 2 – Transitioning the Use of Cryptographic Algorithms and Key Lengths”.

Subscribe to Software RSS

MagneSafe SCRA Windows API and SDK - PN99510105 - v101

This Software Development Kit (SDK) contains the necessary tools to develop applications using MagTek USB HID Readers (Non Keyboard). The package is a Windows API/DLL which provides a demo application, sample code and documentation for the programming environment.

SCRA - Remote Services Updates

This is a remote services tool that is used to perform reconfiguration of SCRA devices in the field. This link will bring you to a landing page to install the application. Please contact MagTek before performing any update to determine if your device requires configuration or firmware changes. Click button to go to URL.

JPOS for Serial (RS-232) - PN99510098 - v102

This JPOS driver is intended for use with our RS232 Swipe readers.

OPOS 1.13 Driver Package for USB HID Swipe Readers - PN99510115 - v107

The OPOS driver for HID Swipe Readers may be used with our Dynamag, SureSwipe, DynaPAD, and non-SCRA USB swipe readers running in HID mode. This package will install the driver, documentation and test application. This driver does not support USB readers set to keyboard emulation mode. This driver supports our HID swipe readers with PID 002 or PID 011.

Iveco Spa USB Devices Driver Download

UPOS for 'POS for .NET 1.12' - PN99510087 - v103

If your reader application uses the POS for .NET 1.12 (UPOS) this service object will provide the ability to address our MiniMICR and MICRImage document scanners, and our Dynamag, SureSwipe, and non-SCRA USB swipe readers running in HID mode that have a PID 002 or PID 011.

Keyboard Wedge - PN99510106 - v101

The Keyboard Wedge DLL extracts information from the keyboard string and makes available the various properties from the card transaction. Both the MiniWedge and the full size keyboard wedge readers are supported.

SendKeys OCX - PN99510077 - v105

The Send Keys OCX offers a convenient way to inject keystrokes into almost any application. This is especially useful when populating an on-screen form with data collected from a magnetic card.

What is the best way to contact support? How to clean MagTek hardware?

• As part of the preventative actions for the Coronoavirus, it is important to clean equipment and surfaces. The Center for Disease Control (CDC) recommends cleaning and disinfecting high-touch surfaces and objects at least once daily. It is important to properly clean and disinfect your MagTek device.
• CLEANING THE EXTERIOR OF DEVICE
• Below are suggestions to ensure proper cleaning of the EXTERIOR of your MagTek device and to help keep you and your customers safe. This includes cleaning and then disinfecting the device.
• Clean the exterior of the device by removing any contaminants, dust, or debris using a soft, lint-free cloth. To clean your device, the lint-free cloth should be slightly dampened using a mild soap and water solution.
• Follow with a soft, dry, lint-free cloth to remove any remaining/excess moisture.
• Using a new soft, slightly dampened, lint-free cloth or wipe, disinfect all surfaces with a surface-appropriate disinfectant. We recommend using disinfecting wipes and/ or isopropyl alcohol wipes in concentrations between 70 and 90% percent. The higher the concentration the faster the cleaner will evaporate, which is better for protecting electronics.
• Allow the device to dry completely.
• CAUTIONS AND WARNINGS
• Avoid using too much liquid while wiping.
• DO NOT use liquid cleaning products or insert any other objects into the device.
• Allowing liquid to get into the device’s internal electronics can cause irreparable damage and void the warranty.
• Avoid damaging the read head, only clean the card path with approved cleaning cards.
• DO NOT spray any cleaners directly onto your device.
• Please reach out to support@magtek.com if you need additional assistance.
• You can also download and link to the cleaning instructions here: https://www.magtek.com/content/documentationfiles/d998200389.pdf

What are the mini swipe card reader part numbers?

• Mini 1, 2 White HID - PN 21040103
• Mini 1, 2 Black HID - PN 21040104
• Mini 1, 2, 3 White HID - PN 21040101
• Mini 1, 2, 3 Black HID - PN 21040102
• Mini 1, 2 White Keyboard Emulation 21040109
• Mini 1, 2 Black Keyboard Emulation - PN 21040110
• Mini 1, 2, 3 White Keyboard Emulation - PN 21040107
• Mini 1, 2, 3 Black Keyboard Emulation - PN 21040108

What are the 100mm OEM Swipe Reader part numbers?

• Integral Electronics,
• Single Track with Cover, TK 1, black - PN 21040004
• Integral Electronics,
• Single Track with Cover, TK 2, black - PN 21040005
• Integral Electronics,
• Dual Tracks with Cover, Tracks 1 & 2 - PN 21040047
• Integral Electronics,
• 3 Tracks with Cover, Tracks 1,2, & 3 - PN 21040057
• Integral Electronics,
• Single Track without Cover, TK 1, black - PN 21040001
• Integral Electronics,
• Single Track without Cover, TK 2, black - PN 21040003
• Integral Electronics,
• Dual Tracks without Cover, Tracks 1 & 2 - PN 21040026

The USB-Link™ 2, the next generation vehicle interface from NEXIQ Technologies, has arrived. Dependable and rugged, the new USB-Link™ 2 is five times faster than its predecessor. It has sixteen times more random access memory than the old USB-Link, and it supports heavier bus loads on simultaneous channels.

The Bluetooth module supports wireless communication via an enhanced data rate (500K b/s J1939). For even more reliability, we’ve upgraded the USB connector to a more robust, automotive grade connector with a latching mechanism. The USB-Link 2 is compatible with a wide range of OEM software applications.

The USB-Link™ 2 comes with the following:

* Latching USB Cable (PN 404032)

* 9-Pin Deutsch Adapter, 1 Meter (PN 493128)

Iveco Spa Usb Devices Driver Download Windows 7

* J1962 Adapter (16-Pin OBD II, 1 Meter (PN 493113)

Iveco Spa Usb Devices Driver Downloads

Note: For best results, Class 1 (100 m range) Bluetooth® USB adapters are recommended. Class 1 adapters are recommended because of their greater operating range. See PN 405001 in the list of Accessories below.

The USB-Link™ 2 is also available with Wi-Fi. Wi-Fi Edition: PN 124034