Owner's Manual for Windows v3.4 USA-19HS USB Serial Adapter (English) Owner's Manual for USA-19HS Windows v3.7S (English) Owner's Manual for Mac OS 8.6 - 9.X USA-19HS USB Serial Adapter (English) Owner's Manual for Mac OS X USA-19HS USB Serial Adapter (English) Product Datasheet. 2019-04-01 FiiOUSBDACDriver-V4.47.0.exe 끂 91341 2.22 MB 2019-04-01 Installation and usage guide of the new generic USB DAC driver for FiiO players & DAC.pdf. The Google USB Driver is required for Windows if you want to perform adb debugging with Google devices. Windows drivers for all other devices are provided by the respective hardware manufacturer, as listed in the OEM USB Drivers document. Download the USBDRVEN driver file from the Sony® Support Web site. NOTE: Save this file to the desktop. When the download completes, on the computer desktop, double-click the USBDRVEN icon. In the USB Driver Software window, click the OK button. NOTE: The driver will extract, and create a folder on the computer desktop named Sonyusb. All devices operating in MTP mode are supported. Note: The MTPdrive is not a replacement for the device's factory (or Windows default) device driver. You must be able to connect your device to the computer and have it visible in the Windows Explorer, before it can be mapped as a drive letter using the MTPdrive.
If you are developing on Windows and want to connect a device for testing,then you need to install the appropriate USB driver. This pageprovides links to the web sites for several original equipment manufacturers (OEMs),where you can download the appropriate USB driver for your device.
If you're developing on Mac OS X or Linux, then you shouldn't need a USB driver.Instead read Using Hardware Devices.
To connect and debug with any of the Google Nexus devices using Windows, youneed to install the Google USB driver.
Install a USB driver
First, find the appropriate driver for your device from the OEM driverstable below.
Once you've downloaded your USB driver, follow the instructions below to install or upgrade thedriver, based on your version of Windows and whether you're installing for the first timeor upgrading an existing driver. Then see Using Hardware Devices forother important information about using an Android device fordevelopment.
Caution:You may make changes to android_winusb.inf file found insideusb_driver (for example, to add support for other devices),however, this will lead to security warnings when you install or upgrade thedriver. Making any other changes to the driver files may break the installationprocess.
Windows 10
To install the Android USB driver on Windows 10 for the first time, do the following:
- Connect your Android device to your computer's USB port.
- From Windows Explorer, open Computer Management.
- In the Computer Management left pane, select Device Manager.
- In the Device Manager right pane, locate and expand Portable Devices or Other Devices, depending on which one you see.
- Right-click the name of the device you connected, and then select Update Driver Software.
- In the Hardware Update wizard, select Browse my computer for driver software and click Next.
- Click Browse and then locate the USB driver folder. For example, the Google USB Driver is located in
android_sdkextrasgoogleusb_driver. - Click Next to install the driver.
Windows 8.1
To install the Android USB driver on Windows 8.1 for the first time, do the following:
- Connect your Android device to your computer's USB port.
- Access search, as follows:
Touch screen: On your computer, swipe in from the right edge of the screen and tap Search.
Using a mouse: Point to the lower-right corner of the screen, move the mouse pointer up, and then click Search.
- In the search box, type into and then click Device Manager.
- Double-click the device category, and then double-click the device you want.
- Click the Driver tab, click Update Driver, and follow the instructions.
Windows 7
To install the Android USB driver on Windows 7 for the first time, do the following:
- Connect your Android device to your computer's USB port.
- Right-click on Computer from your desktop or Windows Explorer, and select Manage.
- Select Devices in the left pane.
- Locate and expand Other device in the right pane.
- Right-click the device name (such as Nexus S) and select Update Driver Software. This will launch the Hardware Update Wizard.
- Select Browse my computer for driver software and click Next.
- Click Browse and locate the USB driver folder. (The Google USBDriver is located in
android_sdkextrasgoogleusb_driver.) - Click Next to install the driver.
Or, to upgrade an existing Android USB driver on Windows 7 and higher with the newdriver:
- Connect your Android device to your computer's USB port.
- Right-click on Computer from your desktop or Windows Explorer, and select Manage.
- Select Device Manager in the left pane of the Computer Management window.
- Locate and expand Android Phone in the right pane.
- Right-click on Android Composite ADB Interface and select Update Driver. This will launch the Hardware Update Wizard.
- Select Install from a list or specific location and click Next.
- Select Search for the best driver in these locations; uncheckSearch removable media; and check Include this location in thesearch.
- Click Browse and locate the USB driver folder. (The Google USBDriver is located in
android_sdkextrasgoogleusb_driver.) - Click Next to upgrade the driver.
Get OEM drivers
| OEM | Driver URL |
|---|---|
| Acer | http://www.acer.com/worldwide/support/ |
| alcatel one touch | http://www.alcatelonetouch.com/global-en/support/ |
| Asus | https://www.asus.com/support/Download-Center/ |
| Blackberry | https://swdownloads.blackberry.com/Downloads/entry.do?code=4EE0932F46276313B51570F46266A608 |
| Dell | http://support.dell.com/support/downloads/index.aspx?c=us&cs=19&l=en&s=dhs&~ck=anavml |
| Fujitsu | http://www.fmworld.net/product/phone/sp/android/develop/ |
| HTC | http://www.htc.com/support |
| Huawei | http://consumer.huawei.com/en/support/index.htm |
| Intel | http://www.intel.com/software/android |
| Kyocera | http://www.kyocera-wireless.com/support/phone_drivers.htm |
| Lenovo | http://support.lenovo.com/us/en/GlobalProductSelector |
| LGE | http://www.lg.com/us/support/software-firmware |
| Motorola | https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481/ |
| MTK | http://online.mediatek.com/Public%20Documents/MTK_Android_USB_Driver.zip (ZIP download) |
| Samsung | http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows |
| Sharp | http://k-tai.sharp.co.jp/support/ |
| Sony Mobile Communications | http://developer.sonymobile.com/downloads/drivers/ |
| Toshiba | http://support.toshiba.com/sscontent?docId=4001814 |
| Xiaomi | http://www.xiaomi.com/c/driver/index.html |
| ZTE | http://support.zte.com.cn/support/news/NewsDetail.aspx?newsId=1000442 |
If you don't see a link for the manufacturer of your device here, go to the support section of the manufacturer's website and search for USB driver downloads for your device.
Setup
Follow these steps to install software for your SmarTrac sign cutter
Install USB drivers by downloading the installation program and running it. Answer ‘yes’ or ‘OK’ to any security prompts.
CDM21228_Setup.exe
Install the 101 Software by downloading the installation file and running it. Answer ‘yes’ or ‘OK’ to any security prompts.
101_setup_full.exe
Continue following the steps in the Ioline Quick Start Guide that was included with your machine. Visit the Manuals tab on this page to find the PDF User and Quick Start Guides and software manuals for your equipment. The Downloads tab includes the software listed above and other tools for your machine for later reference.
Tech Bulletins
Maintenance and Repair
- Y-axis timing belt replacement
- File:Smartrac_100_Contour-Y_timing_belt_replacement.pdf
- Cutting Head Carriage Replacement
- File:Smartrac_100_Contour-Carriage_Replacement.pdf
- Cutting Strip Replacement
- File:Smartrac_100_Contour-Cutting_Strip_Installation-Ioline.pdf
- Dimensional Calibration
- File:Smartrac_100_Contour-Dimensional_Calibration.pdf
- Drive Shaft Assembly Replacement
- File:Smartrac_100_Contour-Drive_Shaft_Assembly_Replacement.pdf
- Plotter Port Test
- File:Smartrac_100_Contour-Plotter_Port_Test.pdf
- How to replace rubber wheel
- File:Smartrac_100_Contour-Replacing_Wheel_On_Pinch_Wheel_Assy.pdf
- White Flat Ribbon Cable replacement
- File:Smartrac_100_Contour-Ribbon_Cable_Replacement.pdf
- How to set up blade inside blade holder
- File:Smartrac_100_Contour-Setting_up_an_Ioline_blade_holder.pdf
- How to replace pinch wheel assembly
- File:Smartrac_100_Contour-Replace_a_pinch_wheel_assy.pdf
- How to replace Y-axis drive belt
- File:Smartrac_100_Contour-Y_drive_belt_replacement.pdf
- How to replace main logic board
- File:Smartrac_100_Contour-Logic_Board_Replacement.pdf
- Remove Keypad Filter Procedure
- File:111036_Remove_Keypad_Filter_Procedure.pdf
- SmarTrac and 100 System with Cradle – Repacking Guide in Original Box
- File:110974_R00_I-S_Cradle_Repacking_Guide.pdf
- SmarTrac and 100 System with Stand – Repacking Guide in Original Box
- File:110975_R00_I-S_Stand_Repacking_Guide.pdf
- SmarTrac and 100 System Ribbon Cable Replacement
- File:111298_I-S_Cutter_Ribbon_Cable_Install_R00.pdf
- SmarTrac Carriage Upgrade
- File:111421_SmarTrac_I-S_Carriage_Upgrade_Procedure_R00.pdf
- Install Cutter Keypad – I/S, 300, 350HF Only
- File:111040_Install_Keypad_on_Cutters_R00.pdf
- Rebuild Carriage Transmission with Existing Motor (Y Axis)
- File:111114_Rebuild_Trans_Assy_No-Motor_IS-300-FJEII_R00.pdf
- Replace Carriage Transmission (Y Axis)
- File:111115_Replace_Trans_Assy_IS-300-350HF-CP2_R00.pdf
- Install Casters on a Stand
- File:111170_R00_Install_Sign-CP_Casters.pdf
- Replace Carriage Flexures – I/S, CrystalPress Only
- File:111198_Flexure_Replacement_R00.pdf
- Swapping Carriage and Paper Motors for Testing – I/S, 300, 350HF Only
- File:111231_Switching_Y-X_Motors_Coldfire_R00.pdf
- Upgrading a Power Supply
- File:111329_Power_Supply_Upgrade_I-S-300_CF_R00.pdf
- Install the Universal Power Supply
- File:111427_Install_Univeral_Power_Supply_R00.pdf
- Install Driveshaft – I/S, CrystalPress Only
- File:111429_Universal_Driveshaft_X_Motor_Replacement_R00.pdf
- Replace Driveshaft Belt (X Axis)
- File:111430_Universal_Driveshaft_X_Belt_Replacement_R00.pdf
- Replace Carriage Transmission Motor (Y Axis)
- File:111431_Universal_Carriage_Y_Motor_Replacement_R00.pdf
- Replace Carriage Transmission Belt (Y Axis)
- File:111432_Replace_IS_Contour_Y-Trans_Motor_Belt_R00.pdf
- Replace Carriage Belt (Y Axis)
- File:111433_Universal_Carriage_Y_Belt_Replacement_R00.pdf
- Remove End Covers
- File:111437_Proc_Remove_End_Covers_CF_R02.pdf
- Remove Bottom Cover
- File:111438_bottom_covers_CF_Rev_0.pdf
- Replace Rear Power and Communication Panel – I/S, 300, 350HF Only
- File:111549_Universal_Rear_Panel_Replacement_R00.pdf
- Replace USB/Serial Logic Board in Rear Panel
- File:109586R01_Replace_USB_PCB.pdf
Software Tips
- How to Plot from Adobe Illustrator
- File:Adobe_Illustrator-DXF_Export.pdf
- How to Plot from CorelDraw™
- File:CorelDraw-Export_to_Ioline_software.pdf
Technical Documentation
- Ioline Syntax Guide 2008
- Comprehensive list of all Ioline syntax commands for developers writing drivers for Ioline machines (except CrystalPress).
File: Ioline_Syntax_Manual_2008.pdf - Official HPGL Language Guide (1996)
- The official HP/GL language guide from Hewlett Packard, last published in 1996. Contains the complete language description although only a subset of the language is supported by Ioline (see the Ioline Syntax Guide above for details). [ref link]
File: HPGL2-RTL_ReferenceGuide_5961-3526_540pages_Sep96.pdf - Ioline HP/GL Driver Guide
- Guide to help developers write drivers to output HPGL formatted vector images for Ioline machines.
File: ioHPGLguide.pdf - Upgrading Ioline Firmware
- Directions for updating firmware in Ioline machines made after the late 1990s.
File: inst_firmware.pdf - Terminal Communication w/ Ioline Equipment
- Directions for setting up and using a terminal program to communicate with Ioline machines.
File: terminal_comm.pdf - Power Entry Module Old vs. New
- Visual guide to power entry wiring layout differences 1995-present.
File: Power_Entry_Module-Old_vs_New.pdf
- DD output for SmarTrac
- How to interpret output—a data dump—from an Ioline SmarTrac when using the !DD@ command.
File:ioDDoutput.pdf
Compliance and Environment
- Ioline ROHS Statement
- Official statement of ROHS compliance for Ioline products.
File: Ioline_RoHS_Complaince_Statement_2014.pdf - Ioline REACH Statement
- Official statement of REACH compliance for Ioline products.
File: Ioline_REACH_Compliance_2020.pdf - Recycle Ioline Components
- The Ioline Recycle website offers options for safely and properly recycling obsolete or damaged components.
Manuals
- SmarTrac I/S & SC Quick Start Guide
- Assembly and setup directions for I/S & SC series cutters.
File:smartrac_qsg_r6.pdf
Version: 6
Posted: 2019.09.10
Size: 4.4 MB - SmarTrac I/S & SC User Guide
- File:smartrac_ug_r5.pdf
Revision: 5
Posted: 2011.02.11
Size: 2.5 MB - SmarTrac SC-72 Quick Start Guide
- File:smartrac_sc72_qsg_r2.pdf
Revision: 2
Posted: 2011.02.11
Size: 596 kb - SmarTrac I/S, SC, & 100 Service Manual
- File:smartrac_servman.exe (PDFs in self-extracting ZIP)
Revision: 0
Posted: 2005.09.14
Size: 5.9 MB - 101 Software User Guide
- File:101_ug_r1.pdf
Revision: 0
Posted: 2015.11.16
Size: 900 KB
Training
- Vector vs Raster
- Understand the basics of vector and raster graphics, and the process of scanning and digitizing images for decorated apparel.
File:vector_v_raster.pdf - CorelDraw™ page Orientation
- Learn how CorelDraw and similar programs orient designs relative to how they are processed by Ioline machines.
File:Software-CorelDraw_Page_Orientation.pdf - Contour graphics with CorelDRAW!®
- Lesson on how to make contour graphics for the 300 System using CorelDRAW!® that also applies to other machines.
File:contour_cuts.pdf - CorelDraw™ Node Reduction Tutorial
- Fix designs that cut very slowly due to many small vectors in design outlines.
File:CorelDraw-Node_Reduction.pdf - CorelDraw™ Single/Stroke Line Fonts
- Learn about making and using single line/stroke fonts in CorelDRAW!®
File:CorelDraw-Single_Line_Fonts.pdf
Using Design Software with Ioline Products
Export from Illustrator
How to export from Illustrator (CS2 and higher) to open in Ioline software.
Export from CorelDraw
How to export from CorelDraw (Any Version) to open in Ioline Software.
Hand Trace a bitmap in CorelDraw
How to hand-trace a bitmap in CorelDraw using the Bezier Curve Tool.
Downloads
- 101 Software
- Production and queue management software for 100 System and SmarTrac I/S cutters. Replaced IQ Plot software.
Download: 101_setup_full.exe
Latest Version: 4.1
Posted: 2015.12.16
Size: 23.5 MB
OS: Microsoft Windows® (x32 and x64): Win 7, Win 8.1 and Win 10
Release Notes:What’s New list
To install: Download the installation file (above) on to the PC connected to the Ioline machine. Run the installation file by double clicking on it. Answer ‘yes/OK’ to security warnings and follow the steps presented by the installation program. When finished, ensure the Ioline machine is powered on with a green light and test the software.
- Control Center Software
- Interface for adjusting plotter parameters for the 600Ae, 600AeX, 28Ae, Stylist Ae, Studio A, 200, 300, 350HF, 100, SmarTrac I/S, SmarTrac Contour, and CrystalPress.
Download: windowsCC_setup_full.exe
Latest Version: 16
Posted: 2015.11.16
Size: 24 MB
OS: Microsoft Windows® (x32 and x64): Win 7, Win 8.1 and Win 10
Release Notes: What’s New list
To install: Running the installer might display a warning if much older previous versions are installed. Remove all previous versions before installing this version. The equipment User Guide has directions for using the Control Center.
Previous Version: If the new Control Center fails to connect, please download and install the previous version 12.4.
Please contact Ioline Customer Service to obtain the latest firmware for your plotter.
- USB Drivers
- For the Ioline 100, 300, 350HF, FlexJet E, StudioJet, 600Ae, SmarTrac I/S & Contour, and CrystalPress equipped with a USB port.
Only for equipment manufactured on or after January 1, 2008
Download: CDM21228_Setup.exe
Latest Version: 2.12.28 (need to check your current version?)
Posted: 2018.05.02
Size: 2.4 MB
OS: Microsoft Windows® (x32 and x64): Win 7, Win 8.1 and Win 10
Read Me: On most Windows based computers, Ioline USB drivers will upgrade automatically through the Windows Update service. Use the file shown above to manually update the USB drivers if desired. Please refer to the USB Installation Guide for more information.
NOTE: If an error appears about “elevation”, run the file by right-clicking on it and choosing “Run as Administrator” instead of left-double-clicking on it.
Install: Download the driver file to the computer that is/will connect to the machine. Power off any connected Ioline machines then install the drivers by double clicking on the downloaded file. Once installation is complete, reboot the computer then connect and power on Ioline equipment to start using the new driver. Windows may go through a ‘New Driver Found’ installation process which is normal.
- Firmware Upgrades
- Please contact Ioline Customer Service to obtain the latest SmarTrac System Firmware upgrade information.
Contact
Order parts, request service or product support
Download Ioline Usb Devices Driver Free
Please phone 1-425-398-8282
or request technical support by email »
Download Ioline Usb Devices Driver Download
Support phone hours are Monday – Friday from 7 a.m. to 5 p.m. Pacific Time.