Itegno Modems Driver

iTegno GPRSModem Frequently Asked Questions (FAQ)

Hardware

1.	Do I need batteries for my iTegno 38XX/39XXGPRS Modem?

Usage

1.	Are there any procedures to follow before detaching theiTegno 38XX/39XX modem from the computer?
2.	How do I get connected to the Internet using theiTegno GPRS Modem?
3.	Is GPRS automatically available with GSM service?
4.	Why isn't my Chinese SMS translated correctly oniTegno Mobile Office Suite?
5.	How do I uninstall Asia Service Pack if I am anon-Chinese Win XP user?
6.	The iTegno Mobile Office Suite's UI was not displayedcorrectly after I changed the language setting to Simplified orTraditional Chinese.
7.	My SIM card is GPRS auto-roaming enabled. a. Do I still need to make any changes to the dial-up connection when Igo overseas? b. Is thereanything else that I should be aware of before I go overseas?
8.	Can I send a message consisting of more than 160characters? How many messages will I be charged for by my networkoperator?

Feature

1.	Does the iTegno GPRS Modem support GSM roaming?
2.	Does the iTegno GPRS Modem support GPRS roaming?
3.	How is the iTegno GPRS Modem different from a mobilephone in enabling the notebook computer wirelessly?
4.	Is the iTegno GPRS Modem just another dedicatedmodem?

Application Development

1.	Can the iTegno GPRS Modem be usedon Mac or Linux operating systems?
2.	How do I confirm if Linux detectsiTegno GPRS Modem?
3.	How will application developers beable to use the iTegno GPRS Modem?

Technology

Hardware

1.	DoI need batteries for my iTegno 38XX/39XX GPRS Modem? Notat all. The computer powers the modem via the USB cable.

Usage

1.	Arethere procedures to follow before detaching the iTegno 38XX/39XX GPRSModem from the computer? Make sure the iTegno Mobile Office suite is closed before detaching themodem from the computer.
2.	Howdo I get connected to the Internet using the iTegno GPRS Modem? There are two ways to connect to the Internet - via GSM or GPRSconnection. GSMconnection: Youneed an Internet access account with an ISP (Internet ServiceProvider). In addition, you may need to subscribe to relevant services(e.g. data services) for your SIM card from your networkprovider. GPRSconnection: Checkwith your mobile network provider to activate GPRS service on your SIMcard. If the mobile service provider offers ISP access, you may notneed to apply for another Internet access account. Dial-up settings forGPRS connection may be obtained from the network provider.
3.	Isthe GPRS automatically available with GSM service? No.The normal GSM network needs some modification before it can supportGPRS. As such, the availability of GPRS service depends on whether theindividual telecommunication company has upgraded its network. Also, touse the GPRS service, the SIM card has to be enabled with it.
4.	Whyisn't my Chinese SMS translated correctly on iTegno Mobile OfficeSuite? Thisis most probably due to the incorrect language settings. Tocorrect this, open iTegno Mobile Office Suite application. Goto 1.Settings 2.Language 3.Select the desired language 4.Click Save to save the changes. 5.Restart iTegno Mobile Office Suite to let the changes take effect. Fornon-Chinese Win XP users, please uninstall Asia Service Park (Please refer to the next question for furtherinstructions).
5.	Howdo I uninstall Asia Service Pack if I am a non-Chinese Win XP user? Uninstalling the Asia Service Pack will allow iTegno Mobile OfficeSuite to properly translate Chinese SMS. To do so, please go to 1. Control Panel 2. Regional and Language Options 3. Select Language tab. 4. Uncheck 'Install files for East Asia Language'. Itis highly recommended that users install a Chinese Language WordProcessor such as NJStar to allow Chinese SMS to be properly displayedin iTegno Mobile Office Suite.
6.	TheiTegno Mobile Office Suite's UI was not displayed correctly after Ichanged the Language setting to Simplified or Traditional Chinese. TheiTegno Mobile Office Suite works best if the selected language is thesame as the Windows default installed language. However, you shouldstill be able to send and receive Chinese SMS on iTegno Mobile OfficeSuite with its content translated correctly.
7.	MySIM card is GPRS auto roaming enabled. a. Do I still need to make any changes to the dial up connection when Igo overseas? b. Is there anything else that I should be aware of before I gooverseas? a.No. You need not make any changes to the dial up connection when youare overseas. b.If your SIM card is GPRS auto-roaming enabled, you should be able toconnect via GPRS seamlessly. Before you go overseas, kindly contactyour local mobile service provider for the list of GPRS roamingpartners at the desired location.
8.	CanI send a message consisting of more than 160 characters? How manymessages will I be charged for by my network provider? Amessage consisting of more than 160 characters is called ConcatenatedSMS. Currently, iTegno Mobile Office Suite supports concatenatedSMS that consists of 456 characters in both sending and receiving. Ifyou send 1 concatenated SMS consisting of more than 456characters, you will be charged for sending 3SMS.

Feature

1.	Doesthe iTegno GPRS Modem support GSM roaming? Yes,when the SIM card has GSM roaming service activated and you have anInternet access account with an ISP.
2.	Doesthe iTegno GPRS Modem support GPRS roaming? Yes,when the SIM card is activated with GPRS roaming service and theoperator has roaming agreement/s with the relevant foreign mobilenetwork providers.
3.	Howis the iTegno GPRS Modem different from a mobile phone in enablingthe notebook computer wirelessly? Powerconsumption TheiTegno GPRS Modem draws power from the laptop via the USB cable,while Bluetooth or Infrared connections would draw power from thatdevice itself. Also, a notebook computer has a large powerreservoir, about five times as much as a mobile phone. USB Connection Usingan USB connection ensures that the battery life of the notebookcomputer is not significantly affected. The fact that the mobile phonehas grown such in its importance that people need it all the time, andthe iTegno Modem frees up the mobile phone for its very importantvoice-centric functions within its limited power capacity; the productis an ideal complement to the busy executive’s communicationneeds. TheUSB cable connection is compatible with all most notebook computers,personal computers, and mobile terminals. For mobile phoneconnections, a proprietary cable has to be purchased whenever the userswitches to another brand of mobile phone. Asfor infrared connections, the stability of line of sight for theinfrared interface makes this option inconvenient for mobileprofessionals. The user would need to ensure that both devices -the mobile device and the terminal (notebook, PC etc.) - are equippedwith an infrared port. However, mobile phones and notebookcomputers are increasingly disposed of this option. Durability TheiTegno GPRS Modem is a durable, hardy device. This is madepossible with its USB connection, and all its components including theantenna, are protected by an external casing which is capable ofwithstanding the impact caused by a drop from table height. There arealso no loose components in the modem.
4.	Isthe iTegno GPRS Modem just another dedicated modem? No,the iTegno GPRS Modem is more than just a modem! The iTegnoMobile Office Suite application which comes with the package allows theuser to perform many functions that are typical of a mobile phone, suchas sending/receiving SMS and managing address book entries, just toname a few. Ask for a demonstration from your iTegno dealer/distributortoday!

Application Development

Canthe iTegno GPRS Modem be used on Mac or Linux operating systems?

Tilldate, the iTegno GPRS Modem is supported on Win 98/ 2000/ Me/ XP(Home and Professional editions). Mac OS 10.2 ,10.3 and 10.4. Driverfor Linux (Redhat 9 and above) are also available for developmentpurposes. For more information, please contact developers@itegno.com.

Howdo I confirm if Linux detects iTegno GPRS Modem?

Toconfirm if Linux detects iTegno GPRS modem, follow the instructionsbelow.
At the terminal window, go to root. Type “Dmesg” at thecommand prompt.
This command will list out the components attached to your Linux. TheiTegno GPRS Modem will be identified as PL2303.C. A detected modem willbe assigned to a USB address, e.g. ttyUSB0. For more information,please contact developers@iTegno.com

Nodriver is required for users with Linux Kernel Version 2.6 & above.Users with lower Linux Kernel versions can just do a simple updateto the higher version.

Howwill application developers be able to use the iTegno GPRS Modem?

Asthe iTegno GPRS Modem is designed on an open architecture,third-party software developers may develop applications that work withthe modem. This will effectively help to broaden the scope of usage forthe modem.

Technology

Whatis GPRS?

GPRSrefers to General Packet Radio Service. GPRS is charged based on theamount of data transferred rather than by airtime. This service isideal for mobile professionals with a need to maintain an“always-on” Internet connection without incurring hefty GSMairtime charges. For example, once your emails have been downloaded orsent, there are no further charges—even if you are stillconnected to the Internet - as no data is being transferred.

Itegno Modem Driver Wireless
Itegno Modems Drivers

Itegno Modem Driver Wireless

The iTegno 3800 modem is compatible with Windows 98 SE/ 2000/ ME/ XP and Vista Operating Systems. Drivers for Linux and Macintosh OS are also available for development purposes. The iTegno 3800 GPRS Modem is fully supported by the ActiveXperts SMS Component software. Download Now (or click here to visit the ActiveXperts web site). Pada kesempatan kali ini saya coba untuk membuat SMS Gateway, kebetulan ada modem itegno boleh pinjem dari si Bos di kantor:) Yang perlu dipersiapkan: - Komputer dgn distro Ubuntu Server 7.10 (Gutsy) i386 - Itegno 3000 GSM modem - Simcard GSM, saya menggunakan Simpati Inilah langkah2 nya: 1.

Itegno Modems Drivers

Sorry for the repost but I really do need to connect my modem to kannel in order to send sms message
I'm sending a http (get) to kannel to modem...
I do get this log when connecting to the modem... Till i stop kannel
2008-08-13 02:49:53 [873] [7] DEBUG: AT2[modem]: detecting modem type
2008-08-13 02:49:53 [873] [7] INFO: AT2[modem]: opening device
2008-08-13 02:49:53 [873] [7] DEBUG: AT2[modem]: device opened
2008-08-13 02:49:54 [873] [7] DEBUG: AT2[modem]: device opened
2008-08-13 02:49:54 [873] [7] INFO: AT2[modem]: speed set to 115200
2008-08-13 02:49:54 [873] [7] DEBUG: AT2[modem]: --> ^M
2008-08-13 02:49:54 [873] [7] DEBUG: AT2[modem]: <-- OK
2008-08-13 02:49:54 [873] [7] DEBUG: AT2[modem]: --> AT^M
2008-08-13 02:49:54 [873] [7] DEBUG: AT2[modem]: <-- OK
2008-08-13 02:49:54 [873] [7] DEBUG: AT2[modem]: --> AT&F^M
2008-08-13 02:49:54 [873] [7] DEBUG: AT2[modem]: <-- OK
2008-08-13 02:49:54 [873] [7] DEBUG: AT2[modem]: --> ATE0^M
2008-08-13 02:49:58 [873] [7] DEBUG: AT2[modem]: detecting modem type
2008-08-13 02:49:58 [873] [7] INFO: AT2[modem]: opening device
2008-08-13 02:49:58 [873] [7] WARNING: AT2[modem]: trying to open device with
not closed device!!! Please report!!!
2008-08-13 02:49:58 [873] [7] INFO: AT2[modem]: closing device
2008-08-13 02:49:58 [873] [7] DEBUG: AT2[modem]: device opened
2008-08-13 02:49:59 [873] [7] DEBUG: AT2[modem]: device opened
2008-08-13 02:49:59 [873] [7] INFO: AT2[modem]: speed set to 115200
2008-08-13 02:49:59 [873] [7] DEBUG: AT2[modem]: --> ^M
2008-08-13 02:49:59 [873] [7] DEBUG: AT2[modem]: <-- OK
2008-08-13 02:49:59 [873] [7] DEBUG: AT2[modem]: --> AT^M
2008-08-13 02:49:59 [873] [7] DEBUG: AT2[modem]: <-- OK
2008-08-13 02:49:59 [873] [7] DEBUG: AT2[modem]: --> AT&F^M
2008-08-13 02:49:59 [873] [7] DEBUG: AT2[modem]: <-- OK
2008-08-13 02:49:59 [873] [7] DEBUG: AT2[modem]: --> ATE0^M
2008-08-13 02:50:03 [873] [7] DEBUG: AT2[modem]: detecting modem type
2008-08-13 02:50:03 [873] [7] INFO: AT2[modem]: opening device
2008-08-13 02:50:03 [873] [7] WARNING: AT2[modem]: trying to open device with
not closed device!!! Please report!!!
2008-08-13 02:50:03 [873] [7] INFO: AT2[modem]: closing device
2008-08-13 02:50:03 [873] [7] DEBUG: AT2[modem]: device opened
2008-08-13 02:50:04 [873] [7] DEBUG: AT2[modem]: device opened
2008-08-13 02:50:04 [873] [7] INFO: AT2[modem]: speed set to 115200
2008-08-13 02:50:04 [873] [7] DEBUG: AT2[modem]: --> ^M
2008-08-13 02:50:04 [873] [7] DEBUG: AT2[modem]: <-- OK
2008-08-13 02:50:04 [873] [7] DEBUG: AT2[modem]: --> AT^M
2008-08-13 02:50:04 [873] [7] DEBUG: AT2[modem]: <-- OK
2008-08-13 02:50:04 [873] [7] DEBUG: AT2[modem]: --> AT&F^M
2008-08-13 02:50:04 [873] [7] DEBUG: AT2[modem]: <-- OK
2008-08-13 02:50:04 [873] [7] DEBUG: AT2[modem]: --> ATE0^M
2008-08-13 02:50:08 [873] [7] DEBUG: AT2[modem]: detecting modem type
2008-08-13 02:50:08 [873] [7] INFO: AT2[modem]: opening device
2008-08-13 02:50:08 [873] [7] WARNING: AT2[modem]: trying to open device with
not closed device!!! Please report!!!
.
.
.
2008-08-13 02:54:23 [873] [7] INFO: AT2[modem]: closing device
2008-08-13 02:54:23 [873] [7] DEBUG: AT2[modem]: device opened
2008-08-13 02:54:24 [873] [7] DEBUG: AT2[modem]: device opened
2008-08-13 02:54:24 [873] [7] INFO: AT2[modem]: speed set to 115200
2008-08-13 02:54:24 [873] [7] DEBUG: AT2[modem]: --> ^M
2008-08-13 02:54:26 [873] [7] DEBUG: AT2[modem]: --> AT^M
2008-08-13 02:54:26 [873] [7] DEBUG: AT2[modem]: <-- OK
2008-08-13 02:54:26 [873] [7] DEBUG: AT2[modem]: --> AT&F^M
2008-08-13 02:54:26 [873] [7] DEBUG: AT2[modem]: <-- OK
2008-08-13 02:54:26 [873] [7] DEBUG: AT2[modem]: --> ATE0^M
2008-08-13 02:54:30 [873] [7] DEBUG: AT2[modem]: detecting modem type
2008-08-13 02:54:30 [873] [7] INFO: AT2[modem]: opening device
2008-08-13 02:54:30 [873] [7] WARNING: AT2[modem]: trying to open device with
not closed device!!! Please report!!!
2008-08-13 02:54:30 [873] [7] INFO: AT2[modem]: closing device
2008-08-13 02:54:30 [873] [7] DEBUG: AT2[modem]: device opened
2008-08-13 02:54:31 [873] [7] DEBUG: AT2[modem]: device opened
2008-08-13 02:54:31 [873] [7] INFO: AT2[modem]: speed set to 115200
2008-08-13 02:54:31 [873] [7] DEBUG: AT2[modem]: --> ^M
2008-08-13 02:54:31 [873] [7] DEBUG: AT2[modem]: <-- OK
2008-08-13 02:54:31 [873] [7] DEBUG: AT2[modem]: --> AT^M
2008-08-13 02:54:31 [873] [7] DEBUG: AT2[modem]: <-- OK
2008-08-13 02:54:31 [873] [7] DEBUG: AT2[modem]: --> AT&F^M
2008-08-13 02:54:31 [873] [7] DEBUG: AT2[modem]: <-- OK
2008-08-13 02:54:31 [873] [7] DEBUG: AT2[modem]: --> ATE0^M
2008-08-13 02:54:35 [873] [7] INFO: AT2[modem]: closing device
2008-08-13 02:54:35 [873] [7] DEBUG: Thread 7
(gw/smsc/smsc_at.c:at2_device_thread) terminates.
Edit: I check and recheck... tried to edit my configs... nothing new happens
My config is this... I'm quite sure about my modem configuration... checking
both dmesg and properties of the modem
My concern is why is there a loop in connecting the modem...
I'm just a newbie in creating a config... Please check if i'm wrong on the
other parts
cause in sending http get i used a normal html (see below)...
but i dont see anything that i receive it on logs (smsbox.log and kannel.log)
i'm totally confused on reading the user manual... hehehe... I'm not so good in
english
but i'm about 70% sure on my config based on manual....
Please please help me
#---------------------------------------------
# CORE
#
# There is only one core group and it sets all basic settings
# of the bearerbox (and system). You should take extra notes on
# configuration variables like 'store-file' (or 'store-dir'),
# 'admin-allow-ip' and 'access.log'
group = core
admin-port = 13000
smsbox-port = 13001
admin-password = bar
#status-password = foo
#admin-deny-ip = '
#admin-allow-ip = '
log-file = '/opt/julius/sms/gateway-1.4.1/gw/logs/kannel.log'
log-level = 0
box-deny-ip = '*.*.*.*'
box-allow-ip = '127.0.0.1;172.20.501.17'
unified-prefix = '+358,00358,0;+,00'
access-log = '/opt/julius/sms/gateway-1.4.1/gw/logs/access.log'
store-file = '/opt/julius/sms/gateway-1.4.1/gw/logs/kannel.store'
#ssl-server-cert-file = 'cert.pem'
#ssl-server-key-file = 'key.pem'
#ssl-certkey-file = 'mycertandprivkeyfile.pem'
#---------------------------------------------
# SMSC CONNECTIONS
#
# SMSC connections are created in bearerbox and they handle SMSC specific
# protocol and message relying. You need these to actually receive and send
# messages to handset, but can use GSM modems as virtual SMSCs
# This is a fake smsc connection, _only_ used to test the system and services.
# It really cannot relay messages to actual handsets!
group = smsc
smsc = fake
smsc-id = FAKE
port = 10000
connect-allow-ip = 172.20.50.17
# SMSC HTTP
# This special 'SMSC' is used for HTTP based connections with other gateways
and various other relay
# services, when direct SMSC is not available.
#group = smsc
#smsc = http
#smsc-id = http
#host = localhost
#port = 14000
#system-type = kannel
#smsc-username = tester
#smsc-password = foobar
#send-url = 'http://localhost:13013/';
#connect-allow-ip = '127.0.0.1'
#log-file = '/opt/julius/sms/gateway-1.4.1/gw/logs/http.log'
#denied-smsc-id id-list = http;modem
# GSM modem
# This driver allows a GSM Modem or Phone to be connected to Kannel and work as
a virtual SMSC
group = smsc
smsc = at
host = 172.20.50.17
port = 13013
smsc-id = modem
modemtype = auto
device = /dev/ttyUSB0
speed = 115200
#pin = 1234
smsc-username = tester
smsc-password = foobar
log-file = '/opt/julius/sms/gateway-1.4.1/gw/logs/modem.log'
#---------------------------------------------
# Modem configuration
group = modems
id = itegno3800
name = 'iTEGNO 3800'
detect-string = 'ITEGNO'
detect-string2 = '3800'
init-string = 'AT+CNMI=2,2,0,0,0'
speed = 115200
no-pin = true
#pin = 1234
#---------------------------------------------
# SMSBOX SETUP
#
# Smsbox(es) do higher-level sms handling after they have been received from
# sms centers by bearerbox, or before they are given to bearerbox for delivery
group = smsbox
bearerbox-host = 172.20.50.17
sendsms-port = 13013
#global-sender = 13013
sendsms-chars = '0123456789 +-'
log-file = '/opt/julius/sms/gateway-1.4.1/gw/logs/smsbox.log'
log-level = 0
access-log = '/opt/julius/sms/gateway-1.4.1/gw/logs/access.log'
#---------------------------------------------
# SEND-SMS USERS
#
# These users are used when Kannel smsbox sendsms interface is used to
# send PUSH sms messages, i.e. calling URL like
# http://kannel.machine:13013/cgi-bin/sendsms?username=tester&password=foobar...
group = sendsms-user
username = tester
password = foobar
#user-deny-ip = '
#user-allow-ip = '
#---------------------------------------------
# SERVICES
#
# These are 'responses' to sms PULL messages, i.e. messages arriving from
# handsets. The response is based on message content. Only one sms-service is
# applied, using the first one to match.
group = sms-service
keyword = nop
text = 'You asked nothing and I did it!'
# There should be always a 'default' service. This service is used when no
# other 'sms-service' is applied.
group = sms-service
keyword = default
text = 'No service specified'
# Service for catching url messages
group = sms-service
keyword =
catch-all = yes
name = http
get-url = '<a href='http://172.20.50.17/tmpy.html?to=%p&text=%r'>http://172.20.50.17/tmpy.html?to=%p&text=%r';;;
accept-x-kannel-headers = true
max-messages = 0
concatenation = true
<html>
<head>
<title></title>
<meta http-equiv='Content-Type'>
</head>
<body>
<form name='temp' action='http://172.20.50.17:13013/cgi-bin/sendsms';>
<input type='text' name='to' value='09228139179' />
<textarea name='text' rows='4' cols='20'>hi miss</textarea>
<input type='submit' value='Submit' name='submit' />
</form>
</body>
</html>
kannel.log
2008-08-13 02:49:53 [873] [0] INFO: Added logfile
`/opt/julius/sms/gateway-1.4.1/gw/logs/kannel.log' with level `0'.
2008-08-13 02:49:53 [873] [0] INFO: Started access logfile
`/opt/julius/sms/gateway-1.4.1/gw/logs/access.log'.
2008-08-13 02:49:53 [873] [0] INFO: HTTP: Opening server at port 13000.
2008-08-13 02:49:53 [873] [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
2008-08-13 02:49:53 [873] [0] DEBUG: Started thread 2
(gwlib/http.c:server_thread)
2008-08-13 02:49:53 [873] [0] DEBUG: Started thread 3
(gw/bb_http.c:httpadmin_run)
2008-08-13 02:49:53 [873] [0] DEBUG: starting smsbox connection module
2008-08-13 02:49:53 [873] [0] INFO: BOXC: 'smsbox-max-pending' not set, using
default (100).
2008-08-13 02:49:53 [873] [0] DEBUG: Started thread 4
(gw/bb_boxc.c:sms_to_smsboxes)
2008-08-13 02:49:53 [873] [0] DEBUG: Started thread 5 (gw/bb_boxc.c:smsboxc_run)
2008-08-13 02:49:53 [873] [4] DEBUG: Thread 4 (gw/bb_boxc.c:sms_to_smsboxes)
maps to pid 873.
2008-08-13 02:49:53 [873] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) maps
to pid 873.
2008-08-13 02:49:53 [873] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) maps
to pid 873.
2008-08-13 02:49:53 [873] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) maps
to pid 873.
2008-08-13 02:49:53 [873] [0] INFO: Set SMS resend frequency to 60 seconds.
2008-08-13 02:49:53 [873] [0] INFO: SMS resend retry set to unlimited.
2008-08-13 02:49:53 [873] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps to
pid 873.
2008-08-13 02:49:53 [873] [0] INFO: DLR rerouting for smsc id <FAKE> disabled.
2008-08-13 02:49:53 [873] [0] DEBUG: Started thread 6
(gw/smsc/smsc_fake.c:fake_listener)
2008-08-13 02:49:53 [873] [6] DEBUG: Thread 6
(gw/smsc/smsc_fake.c:fake_listener) maps to pid 873.
2008-08-13 02:49:53 [873] [0] INFO: DLR rerouting for smsc id <modem> disabled.
2008-08-13 02:49:53 [873] [0] INFO: Added logfile
`/opt/julius/sms/gateway-1.4.1/gw/logs/modem.log' with level `0'.
2008-08-13 02:49:53 [873] [0] INFO: AT2[modem]: configuration doesn't show
modemtype. will autodetect
2008-08-13 02:49:53 [873] [0] DEBUG: Started thread 7
(gw/smsc/smsc_at.c:at2_device_thread)
2008-08-13 02:49:53 [873] [8] DEBUG: Thread 8 (gw/bb_smscconn.c:sms_router)
maps to pid 873.
2008-08-13 02:49:53 [873] [8] DEBUG: sms_router: time to sleep 30.00 secs.
2008-08-13 02:49:53 [873] [0] DEBUG: Started thread 8
(gw/bb_smscconn.c:sms_router)
2008-08-13 02:49:53 [873] [0] INFO: ----------------------------------------
2008-08-13 02:49:53 [873] [0] INFO: Kannel bearerbox II version 1.4.1 starting
2008-08-13 02:49:53 [873] [0] INFO: Loading store file
`/opt/julius/sms/gateway-1.4.1/gw/logs/kannel.store'
2008-08-13 02:49:53 [873] [0] INFO: Store-file size 0, starting to unpack
2008-08-13 02:49:53 [873] [0] INFO: Retrieved 0 messages, non-acknowledged
messages: 0
2008-08-13 02:49:53 [873] [0] DEBUG: Started thread 9
(gw/bb_store.c:store_dumper)
2008-08-13 02:49:53 [873] [0] INFO: MAIN: Start-up done, entering mainloop
2008-08-13 02:49:53 [873] [0] DEBUG: smsc_fake: start called
2008-08-13 02:49:53 [873] [0] DEBUG: AT2[modem]: start called
2008-08-13 02:49:53 [873] [7] DEBUG: Thread 7
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 873.
2008-08-13 02:49:53 [873] [7] INFO: Logging thread `7' to logfile
`/opt/julius/sms/gateway-1.4.1/gw/logs/modem.log' with level `0'.
2008-08-13 02:49:53 [873] [8] DEBUG: sms_router: gwlist_len = 0
2008-08-13 02:49:53 [873] [9] DEBUG: Thread 9 (gw/bb_store.c:store_dumper) maps
to pid 873.
2008-08-13 02:49:53 [873] [9] DEBUG: Dumping 0 messages to store
2008-08-13 02:50:51 [873] [5] INFO: Client connected from <172.20.50.17>
2008-08-13 02:50:51 [873] [5] DEBUG: Started thread 10 (gw/bb_boxc.c:function)
2008-08-13 02:50:51 [873] [10] DEBUG: Thread 10 (gw/bb_boxc.c:function) maps to
pid 873.
2008-08-13 02:50:51 [873] [10] DEBUG: Started thread 11
(gw/bb_boxc.c:boxc_sender)
2008-08-13 02:50:51 [873] [11] DEBUG: Thread 11 (gw/bb_boxc.c:boxc_sender) maps
to pid 873.
2008-08-13 02:54:30 [873] [0] WARNING: Killing signal or HTTP admin command
received, shutting down...
2008-08-13 02:54:30 [873] [0] DEBUG: Shutting down Kannel...
2008-08-13 02:54:30 [873] [0] DEBUG: shutting down smsc
2008-08-13 02:54:30 [873] [0] DEBUG: Shutting down SMSCConn FAKE, slow
2008-08-13 02:54:30 [873] [0] DEBUG: AT2[modem]: Shutting down SMSCConn, slow
2008-08-13 02:54:30 [873] [0] DEBUG: shutting down udp
2008-08-13 02:54:30 [873] [6] DEBUG: smsc_fake connection has completed
shutdown.
2008-08-13 02:54:30 [873] [6] DEBUG: Thread 6
(gw/smsc/smsc_fake.c:fake_listener) terminates.
2008-08-13 02:54:33 [873] [10] INFO: Connection closed by the box <172.20.50.17>
2008-08-13 02:54:33 [873] [11] DEBUG: send_msg: sending msg to box:
<172.20.50.17>
2008-08-13 02:54:33 [873] [11] DEBUG: Thread 11 (gw/bb_boxc.c:boxc_sender)
terminates.
2008-08-13 02:54:33 [873] [10] DEBUG: Thread 10 (gw/bb_boxc.c:function)
terminates.
2008-08-13 02:54:35 [873] [8] DEBUG: Thread 8 (gw/bb_smscconn.c:sms_router)
terminates.
2008-08-13 02:54:35 [873] [4] DEBUG: Thread 4 (gw/bb_boxc.c:sms_to_smsboxes)
terminates.
2008-08-13 02:54:35 [873] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run)
terminates.
2008-08-13 02:54:35 [873] [0] INFO: All flow threads have died, killing core
2008-08-13 02:54:35 [873] [0] DEBUG: Waiting for 2 (gwlib/http.c:server_thread)
to terminate
2008-08-13 02:54:35 [873] [3] DEBUG: HTTP: No clients with requests, quitting.
2008-08-13 02:54:35 [873] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run)
terminates.
2008-08-13 02:54:35 [873] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread)
terminates.
2008-08-13 02:54:35 [873] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) terminates.
2008-08-13 02:54:35 [873] [9] DEBUG: Dumping 0 messages to store
2008-08-13 02:54:35 [873] [9] DEBUG: Thread 9 (gw/bb_store.c:store_dumper)
terminates.
2008-08-13 02:54:35 [873] [0] INFO: Total WDP messages: received 0, sent 0
2008-08-13 02:54:35 [873] [0] INFO: Total SMS messages: received 0, sent 0
2008-08-13 02:54:35 [873] [0] DEBUG: Immutable octet strings: 210.
smsbox.log
2008-08-13 02:50:51 [917] [0] INFO: Added logfile
`/opt/julius/sms/gateway-1.4.1/gw/logs/smsbox.log' with level `0'.
2008-08-13 02:50:51 [917] [0] INFO: Logging accesses to
'/opt/julius/sms/gateway-1.4.1/gw/logs/access.log'.
2008-08-13 02:50:51 [917] [0] INFO: Started access logfile
`/opt/julius/sms/gateway-1.4.1/gw/logs/access.log'.
2008-08-13 02:50:51 [917] [0] INFO: HTTP: Opening server at port 13013.
2008-08-13 02:50:51 [917] [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
2008-08-13 02:50:51 [917] [0] DEBUG: Started thread 2
(gwlib/http.c:server_thread)
2008-08-13 02:50:51 [917] [0] INFO: Set up send sms service at port 13013
2008-08-13 02:50:51 [917] [0] DEBUG: Started thread 3
(gw/smsbox.c:sendsms_thread)
2008-08-13 02:50:51 [917] [0] DEBUG:
----------------------------------------------
2008-08-13 02:50:51 [917] [0] DEBUG: Kannel smsbox version 1.4.1 starting
2008-08-13 02:50:51 [917] [3] DEBUG: Thread 3 (gw/smsbox.c:sendsms_thread) maps
to pid 917.
2008-08-13 02:50:51 [917] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) maps
to pid 917.
2008-08-13 02:50:51 [917] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps to
pid 917.
2008-08-13 02:50:51 [917] [0] DEBUG: Started thread 4
(gw/smsbox.c:obey_request_thread)
2008-08-13 02:50:51 [917] [0] DEBUG: Started thread 5
(gw/smsbox.c:url_result_thread)
2008-08-13 02:50:51 [917] [5] DEBUG: Thread 5 (gw/smsbox.c:url_result_thread)
maps to pid 917.
2008-08-13 02:50:51 [917] [0] DEBUG: Started thread 6
(gw/smsbox.c:http_queue_thread)
2008-08-13 02:50:51 [917] [0] INFO: Connected to bearerbox at 172.20.50.17 port
13001.
2008-08-13 02:50:51 [917] [4] DEBUG: Thread 4 (gw/smsbox.c:obey_request_thread)
maps to pid 917.
2008-08-13 02:50:51 [917] [0] DEBUG: Started thread 7
(gw/heartbeat.c:heartbeat_thread)
2008-08-13 02:50:51 [917] [7] DEBUG: Thread 7 (gw/heartbeat.c:heartbeat_thread)
maps to pid 917.
2008-08-13 02:50:51 [917] [6] DEBUG: Thread 6 (gw/smsbox.c:http_queue_thread)
maps to pid 917.
2008-08-13 02:54:32 [917] [0] ERROR: SIGINT received, aborting program...
2008-08-13 02:54:32 [917] [0] INFO: Received (and handled?) 0 requests in 221
seconds (0.00 per second)
2008-08-13 02:54:32 [917] [0] INFO: Kannel smsbox terminating.
2008-08-13 02:54:32 [917] [7] DEBUG: Thread 7 (gw/heartbeat.c:heartbeat_thread)
terminates.
2008-08-13 02:54:32 [917] [0] DEBUG: Waiting for 2 (gwlib/http.c:server_thread)
to terminate
2008-08-13 02:54:32 [917] [3] DEBUG: HTTP: No clients with requests, quitting.
2008-08-13 02:54:32 [917] [3] DEBUG: Thread 3 (gw/smsbox.c:sendsms_thread)
terminates.
2008-08-13 02:54:33 [917] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread)
terminates.
2008-08-13 02:54:33 [917] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) terminates.
2008-08-13 02:54:33 [917] [0] DEBUG: Waiting for 4
(gw/smsbox.c:obey_request_thread) to terminate
2008-08-13 02:54:33 [917] [4] DEBUG: Thread 4 (gw/smsbox.c:obey_request_thread)
terminates.
2008-08-13 02:54:33 [917] [6] DEBUG: Thread 6 (gw/smsbox.c:http_queue_thread)
terminates.
2008-08-13 02:54:33 [917] [0] DEBUG: Waiting for 5
(gw/smsbox.c:url_result_thread) to terminate
2008-08-13 02:54:33 [917] [5] DEBUG: Thread 5 (gw/smsbox.c:url_result_thread)
terminates.
2008-08-13 02:54:33 [917] [0] DEBUG: Immutable octet strings: 176.